Neu-f NF.3001 Manual do Utilizador descarregar pdf

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

www.neu-f.com

CAT BACK MIDDLE PIPE

2012-14 Fiat 500 Abarth

PART # NF.3002

INSTALLATION INSTRUCTIONS

PART LIST: 1 – Front & Middle Pipe Section 2 – Flange Nut

1 – Band Clamp

TOOLS REQUIRED: 1 – 13mm Socket 1 – 15mm Socket

1 – 22mm Wrench 1 – 10mm Socket

1 –11mm Deep Socket 1 – Contact Cleaner or Equivalent

1 – Anti-Seize Compound 1 - WD-40 or Equivalent

1. Park car on a flat, level surface capable of

supporting the vehicle’s weight on jack and jack

stands. Using the manufacturer’s recommended

lifting point(s), raise vehicle and support with

jack stands. NEVER WORK ON A VEHICLE

SUPPORTED ONLY WITH A JACK!

2. Remove lower engine splash pan. Using a 10mm

socket remove the (6) mounting bolts.

3. Spray WD-40 or equivalent on studs at catalytic

converter to down-pipe flange, exhaust hanger

pins and exhaust clamp bolts to ease removal.

4. Using 22mm wrench, remove oxygen sensor.

5. Remove exhaust support bolt at engine oil pan

using 13mm socket.

6. Remove the (2) front exhaust flange nuts using

a 13mm socket.

7. Remove exhaust hanger and disconnect exhaust

at clamp connection just in front of rear axle

beam.

1 2

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX www.neu-f.com CAT BACK MIDDLE PIPE 2012-14 Fiat 500

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX www.neu-f.com 8. Flip over pipe and then remove from vehicle. 9.

Mais documentos para Para o carro Neu-f NF.3001

Sem comentários